Wednesday, October 11, 2017

A very rare bracelet, one for the scholars

Every once in a great while, we come upon a piece so rare and interesting that we post it on our blog here, even if (like this one) it is not for sale. The last time we did this was with a dated silver bracelet--very interesting and informative for true students of the art and history of Southwestern Indian silverwork. This piece does not have a firm date like this one, but it has a feature that is so rare we wanted everyone to see it.

Here is the front view:
A very nice piece, with a good old turquoise on a stamped plate. The band is split, rather than being wires soldered together--much more technically challenging. And the side view:
You can better see the splits in the single silver band. A very fine old bracelet, circa 1915, but not an earthshaker just yet. But what is that at the end? Terminal stones? Now we're getting somewhere. And here is where it gets very interesting:
Two rough-cut stones inside old sawtooth bezels. Very interesting indeed. Not unheard of, certainly, but quite interesting. But here is where my photography fails me--if I could get close enough and put a bright enough light on those stones, the picture would show a red glow. Because there are not turquoise, but rather garnets--known to exist in old Navajo jewelry, but incredibly rare. This is the first and only time we have ever seen garnets set on an old bracelet as terminal stones. They are very rough looking, because these are naturally occurring river garnets, rather than mined garnets--garnets can be found in streambeds in the Southwest, and tend to be darker and rougher in appearance than their cousins that come from mines.

Anyone else out there ever seen anything like this? If so, please let us know.

Tuesday, September 26, 2017

A memory of the past, in memory of Marti Struever

Back in 1992, when I was a young pup of (your guess here) years, I had a job with the Crow Canyon Archaeological Center in Cortez, Colorado. Being somewhat young and able to carry large quantities of luggage, as well as the proud possessor of a valid drivers' license, my job was to plan and staff trips throughout the Southwest, where we would visit archaeological and cultural areas of interest. To put it bluntly, I was a glorified van driver, but a van driver who had to know a whole bunch about the Indian Southwest, its people and its history. So, a highly educated van driver. Those of you who know me will be nodding vigorously and saying, "Sounds perfect. Just throw in that he needed to eat Cheetos while he drove, and it would be the ideal job." I didn't have to eat Cheetos, actually. I could eat Doritos if I wanted to--but I digress.

One day, during a staff meeting, I was told that I was going to be a driver on a trip called Art and Archaeology, which differed from most of our archaeologically based trips in that the main focus was on visiting living artists at their homes and studios. The main attraction to me was that after months of living on minimum wage, I would get to spend three days in Santa Fe with a Crow Canyon expense account and eat well; a close second was meeting up close and personal with some of the artist whose work I had only seen in books. The trip would be led by a woman named Martha Struever, whom everyone called Marti. She was married to the president of Crow Canyon, and was supposedly one of the big experts in this kind of thing. Sounded good--good art with a knowledgeable guide, and meals that didn't come in a Styrofoam box. A dream gig for me. But then came the kicker: my boss told me that the trip leader, this Marti, had a heart condition and was in delicate health. So, the main part of my job would be to carry all her luggage and make sure she didn't die. Yippee. I could just see it--the company president's wife, who also happened to be a big shot in a major industry in the Southwest, dies on my watch and I don't ever work in the Four Corners again.

It was with more than a little bit of trepidation that I waited at the gate for Marti's airplane to arrive (back when you could still wait at the gate.) Since we had never met, I hoped that my Crow Canyon t-shirt would be enough for her to recognize me, though from what my boss had said I was sure I would recognize her y her wheelchair. Imagine how surprised I was when an impeccably dressed woman strode briskly up to me and introduced herself as Marti, then left me in her wake on the way to gather her luggage (which, by the way, was just as bulky and numerous as I had feared.) Not what I had expected at all--hardly an invalid, though her health form on file at the office had clearly stated her heart trouble.

Over the next week, I was constantly amazed by her knowledge, her energy and her huge circle of friends and colleagues in the Southwest. We zipped from place to place, from Hopi to Kayenta to Farmington to Santa Fe, stopping along the way to meet artists and dealers who all seemed to know Marti as well as their own families. And her delicate heart? No problems at all, partly because I was the one lugging her giant suitcases throughout all of the Four Corners states. In later years, when I got to know Marti as a colleague and friend, I often thought of asking her if she had brought along extra stuff because she knew someone else would be carrying it, though I never did. But I did often remind her of her "delicate" condition on that trip, and we had a good laugh about it.

We got the news this morning that Marti had passed away, and were saddened to hear it. But we, as everyone else who knew her, should be glad that she lived her life the way we all should--doing what we love with interesting and talented people at our side, even if they are only talented at eating Cheetos and driving a van. And carrying heavy luggage. Thank you for everything, Marti, and rest in peace.

Tuesday, September 19, 2017

In Praise of the Humble Bezel

When looking at the kind of jewelry we all love, historic American Indian silverwork, it would be hard to overstate the importance of the bezel in dating a piece. Bezels, which are technically silver strips wrapped around a stone to hold it in place on a silver base, have changed quite a bit over time, as the tools, materials and techniques available to silversmiths have become more and more advanced.

Early on, the big problem facing Indian silversmiths was how to encircle a stone at an angle without folding the thin silver of the bezel. (Imagine wrapping a strip of paper around an orange without there being gaps or folds--try it sometime! It is basically impossible.) To solve this problem, early smiths would usually crimp or notch the silver, which looked something like this (circa 1900):

Later, some smiths would notch the silver all the way around the stone, creating what we call a sawtooth bezel (circa 1915).

As you can see, this neatly solved the problem of having the thin silver fold over or form gaps. And the visual effect was quite interesting, so much so that some smiths continued to use the sawtooth bezel well into the 1940s, after it was no longer necessary. Here is a ring with a sawtooth bezel from the 1930s.

To make a smooth bezel before 1920 was a real challenge, but could be done if the stone had a high dome and the silver was left somewhat thick. Here is an example from circa 1915:

You can see that the bezels are not perfectly smooth, but considering the early date, the smith did as good a job as he possibly could have managed.

By 1935, the introduction of commercially made bezels had made smooth bezels possible, though it would be some time before smiths in the Southwest were universally able to manipulate them with near-perfect dexterity. Here is a ring with what are probably early commercial bezels--note that they are not perfectly done (circa 1925-30):

And finally, when the use of commercial bezels became the rule rather than the exception, a smooth bezel that was just about perfect was not only possible, but commonplace. Here is an example by Fred Peshlakai from circa 1950:

The moral of the story is, know your bezels. They can be your best friend in dating older Southwest Indian silverwork.

Friday, July 14, 2017

Another Santa Fe show? Really?

Some of you may have noticed that Turkey Mountain Traders has a new show on the schedule for Santa Fe. This one is the Objects of Art show, which runs from August 10-13. The obvious question is why we need another show, since we already do our private condo show, the Antique Indian Show and the show at the Eldorado Hotel during Indian Market. The answer is that we will not be showing the same material at the Objects show--while the other shows will have our selection of jewelry, textiles and beadwork, the Objects show will feature a special Midwest collection of folk art and Mexicana--pottery, santos, ex votos, bateas, lacquerware and many other wonderful surprises.

Come see us at all the shows!

Friday, April 21, 2017

What you need in an appraisal

One of the most common questions we get is "How much is my (fill in the blank) worth?" And the most frustrating question we get is the exact same one. It isn't that we don't enjoy these Roadshow-type moments were we can help someone to greater cherish their family heirloom, because that can be very satisfying. But in most cases, it is an impossible situation for us, much like when someone asks an auto mechanic why their car won't start or a doctor why their finger hurts when they bend it backwards. In all those cases, there are two correct answers: first, "I have no idea without seeing it," and second, "Do you want an appraisal/diagnosis?"

If you feel sick, you go to a qualified doctor. If your car won't start, you drag it to a qualified mechanic. And if you don't know what Granny's old necklace is worth, you bring it to a qualified appraiser. But what you need from that appraiser may not be as simple as just a value--maybe you want to sell it, or maybe you want to know how much insurance you need for it. In the first case, the number you want is what the appraiser, or someone like them, would be willing to pay for it, while in the second case you want to now what you might have to pay to replace it if something terrible happened. The two numbers are normally quite different, and though both are true values you need to know before you bring the item in for an appraisal exactly why you are doing it.

A qualified and competent appraiser will ask you what type of appraisal you want, and will also tell you if the item is something that might be of interest if it were for sale. In some cases, the appraiser will not be a dealer in that type of material--which raises an interesting conundrum: how can an appraiser who is not actively involved in the marketplace have a true idea of current values? The answer to this problem is to find an appraiser who is both well-acquainted with the marketplace and USPAP (Uniform Standards of Property Appraisal Practices) compliant. USPAP requires appraisers who follow that set of guidelines to be completely transparent about any potential interest in objects they appraise, and to establish beforehand what type of appraisal is desired by the client. It is possible to be an active dealer AND be USPAP compliant, and such a person is likely to be a good candidate to handle your appraisal. (Also, by USPAP guidelines, they cannot give "off the cuff" appraisals without following a set of procedures that ensures the quality and thoroughness of the appraisal. Kind of like a doctor won't diagnose your athlete's foot while standing next to you at a bus stop.)

Turkey Mountain Traders does appraisals, and Steve has completed the course to become USPAP compliant. If we can help you with any appraisal needs, we are ready, willing and capable.

Thursday, March 9, 2017

Patania or patina? To polish or not to polish

There are two schools of thought when it comes to cleaning or polishing American Indian silver. The first school of thought is that it was shiny when it was made, and it should be shiny now. The second is that patina is part of the history of any object, and should be left alone as much as possible. Both sides have their points, and both have their problems. So, which is it? Do we scrub all our silver down with a Brillo pad until it gleams like a mirror in the noonday sun? Or do we let it turn black with tarnish? In our minds, the answer is neither, and depends on the piece.

In general, tarnish on silver is a bad thing. Generations of English butlers can't be all wrong--the family silver needs to be polished. But does this hold true for antique Navajo silver? Should we bring out our silver polishing cream and make it gleam? Not really, no. We only used silver polishing cream when a piece has tarnished so badly that it is completely black, and the stamped or filed designs can no longer be seen. It is far preferable to use nothing but a silver polishing cloth to get off as much of the tarnish as will come, which is usually most of it. A general rule of thumb is that for unsigned pieces from before 1940, a polishing cloth is the only thing you should be using.

But what about more contemporary pieces done by known artists like Frank Patania Sr.? There, things are different. Unlike older pieces, the bright shine of the unstamped silver is an integral part of the beauty of the piece. This box is an excellent example:

The silver, unsullied by any markings, is supposed to stand alone and accent the turquoise setting in the center. In this case, it would be a crime to leave any tarnish on the smooth surface, which may mean using polishing cream.

In sum, if the artist used a smooth expanse of silver as a decorative element, we owe it to him /her to keep that surface as clean as possible. Therefore, polish away.

Tuesday, January 24, 2017

An Important Piece Everyone Should See

Once in a while, a piece comes our way that is so informative that we want everyone to see it, for what it can teach us. Here is one of those pieces, a truly great all-silver Navajo bracelet with a stunning twist.

The decoration on this bracelet is done with a combination of stampwork, filework and repousse, which is typical of high-quality early bracelets. It is fashioned from an annealed band of ingot silver, and then decorated before being rounded into bracelet shape.

This view of the inside shows the three long repousses, as well as some of the delaminations that developed in the silver during the annealing process. You can also see the sall bosse on the terminals, which were done by repousseing and filing the fluting onto the front side, a very difficult and time-consuming process. But what is truly stunning about this bracelet can be seen in the next photo:

In addition to the initials RNB, undoubtedly the original owner, there is a professionally engraved date on the back, the year 1905. Clearly, the original owner (or even a very early owner) took the bracelet to a professional jeweler and had initials and a date engraved on the back, where it can still be clearly seen. It is incredibly rare to find a great early piece with an associated date, and it shows what fine work the early Navajo silversmiths could accomplish. We and other scholars of old Navajo silver have always associated repousse and filework with pieces from this era, and this bracelet proves without a doubt how skilled the great artists of the 1900-1905 era really were at stampwork as well.